Small Business Government Contracts
What Is Classed As A Small Business?
Small businesses are a major priority in the world of federal government contracting, but small businesses must also fit a certain size standard in order to be classified as a small business for government contracting programs. The specific definition of a small business depends on what industry that business operates in.
There are two primary methods that the government uses for determining business size, depending on the industry of the business.
1. Receipts Method for Service Industries
This is the total income plus the “cost of goods sold”. Receipts are calculated over either a three-year or a five-year average. For firms that have been in business less than five years, you would use the total receipts for the period the company has been in business divided by the number of weeks in business, multiplied by 52.
2. Number of Employees Method for Manufacturing Industries
This is the average number of employees over the business’s last 12 calendar months. The number of employees includes the employees of its domestic and foreign affiliates as well as part-time and temporary employees, which are counted the same as full time employees. Firms in business less than one year should use the average number of employees for each of the pay periods during which it has been in business.
The result from either method 1 or 2 is then aligned with the business’s NAICS code, which represents the industry in which the business operates, to make the determination whether or not they qualify as a small business.
Do you qualify as a small business?
You can check whether your business fits under the small business category by using this size standards tool.
Win More Government Contracts for Your Small Business
Learn how to get your small business started in government contracting plus get tips on bidding on contracts and developing strong proposals.
Types of Small Business Set-Asides
For those that qualify as a small business, the U.S. Small Business Administration (SBA) offers a number of programs designed to help them win their share of federal government contracts. For example, the U.S. federal government has a goal of conducting 23% of prime contracts with small businesses and 30% of subcontractor contracts with small businesses. These small business set-aside opportunities can be either competitive or sole-sourced.
Below are definitions for several of the most commonly-used socioeconomic categories these set-aside programs are designed to support:
- Women Owned Small Business: The SBA’s definition of a Women Owned Small Business (WOSB) is a small business that has women manage the day-to-day operations who also make long-term decisions, and must be at least 51% controlled and owned by women who are U.S. citizens. The government aims to award at least 5% of federal contracting dollars to qualifying WOSBs every year.
- 8(a) Small Disadvantaged Business: The definition of a Small Disadvantaged Business is a small business that is 51% or more owned by one or more people who are socially and economically disadvantaged. The government aims to award at least 5% of federal contracting dollars to qualified small disadvantaged businesses every year.
- Service-Disabled Veteran Owned Small Business: The definition of an Service-Disabled Veteran Owned Small Business (SDVOSB) is a small business that is 51% owned and controlled by one or more service-disabled veterans (who must have a service-connected disability), and that has one or more service-disabled veterans managing day-to-day operations who also make long-term decisions. The government aims to award at least 3% of federal contracting dollars to qualifying SDVOSBs firms every year.
- HUBZone: The government aims to award at least 3% of federal contracting dollars to HUBZone-certified small businesses every year. A HUBZone is a historically underutilized business zone where the government is looking to spark economic activity such as job creation. Of the small business programs, it is the only program not focused on the ownership of the business, but rather the location of the business and its employees.
Many government agencies have offices of small and disadvantaged business utilization (OSDBUs) and/or small business programs that are focused on maximizing the opportunity for small businesses, but to take advantage of them, contractors must have the proper certification.
How to Win Government Contracts for Your Small Business
Now that you understand common socioeconomic categories designed to help small businesses like yours thrive in the government contracting space, it’s important to understand the specific steps your business can take to find and win more small business contracting opportunities. Here are three tips that will make it easier to win government contracts for your small business.
- Subcontracting: As a way to show past experience, small businesses often break into government contracting by first seeking out subcontracting partnerships and serving as a member of a prime contractor’s team. By teaming with a prime, your firm can establish valuable contracting experience while avoiding having to navigate the complex compliance requirements and challenges alone.
- Mentoring: Small businesses can get valuable business development coaching and mentoring from an experienced government contractor though the SBA’s Mentor-Protégé Program (MPP).
- Networking: Reach out to an agency’s small business office to learn about their small business goals. Make sure that the agency has your firm’s capability statements on-hand to influence future procurements and increase your potential of being included in the bidder’s pool for upcoming projects.
If you want to find more specific steps you can take to grow your government sales in the public sector and win more small business opportunities then Deltek’s guide on Selling to the Government as a Small Business will help. It is designed to provide an understanding of government acquisition priorities and policies, and assist in building a small business public sector sales strategy.
GovWin’s Small Business Resource Center is another great sales strategy resource. It’s a curated toolkit for finding small business opportunities, learning about agency buying behavior, identifying potential teaming partners, finding the right government contacts, staying informed about market conditions and accessing training and education resources.
Resource Center: Grow Your Success as a Small Business Government Contractor
GovWin’s Small Business Resource Center serves as your toolkit for finding small business opportunities, staying informed about current market conditions and more.
Government Contracting Compliance for Small Businesses
One of the most important aspects when starting out in government contracting is to comply with all the rules and regulations outlined by the Federal Acquisition Regulation (FAR) and Cost Accounting Standards (CAS). The FAR gives federal agencies overarching guidance on audits – a set of consistent, uniform policies and procedures within the federal acquisition process. The CAS are meant to create consistency in pricing and accounting practices.
Contractors who hold any Department of Defense (DoD) contracts must also be in compliance with the Defense Contract Audit Agency (DCAA) and Defense Contract Management Agency (DCMA), which conduct a variety of audits to assure the government that your business is operating within approved parameters. Furthermore, many businesses receiving funding from the DoD will need to meet various Cybersecurity Maturity Model Certification (CMMC) compliance levels. As your small business grows, it’s essential to reduce risk of non-compliance by establishing consistent internal standards for timekeeping, travel, delegation of authority, accounting, estimating, billing and labor.
Getting Started with DCAA Compliance
If your business lacks fully realized insight into internal controls and project reporting, prepare to make the DCAA severely unhappy! Tracking project information and maintaining iron-clad financial accuracy is key to staying within the agency’s good graces and to be considered for future contract needs. Your accounting system should be able to track costs separately such as direct and indirect costs, accounting costs, billing costs and labor costs. Ideally, it should be fully integrated with your timekeeping system and be able to keep track of all of the reports that the DCAA wants to see during an audit. Accounting solutions that are not purpose-built for government contractors can fall short in the eyes of government agencies because of the depths, layers and nuances needed to reach the meticulous level many contracts require.
Additionally, after you deliver on more and more contracts, your company will start to grow as you win more business and larger projects with more working parts. Managing more work generally means adding more headcount to address all the needs of a project as quickly and efficiently as possible. It is not uncommon for a government contractor to go from a 20-person shop, to an 80, 90, 100, sometimes even 200-person operation, in 12 to 24 months’ time, based on contract needs and requirements. This is when accounting solutions that are not already purpose-built for compliance can become more limited in terms of capability and process management.
Your Guide to Government Compliance
Navigating compliance regulations can be difficult for even the most seasoned of government contractors. Get an overview of top priorities and how Costpoint provides a clear path to compliance.
Selecting a Small Business Accounting Solution
Small businesses face unique challenges that require a careful balance of limited time and resources with running a project-based firm. To alleviate these challenges, start with Deltek’s government contracting solutions that have supported small business endeavors for over 30 years. GovWin IQ, a market intelligence solution and Costpoint, an enterprise resource planning (ERP) solution, serve as strategic tools and provide competitive advantages, bringing together disparate processes to help your small business succeed.
Related Resources
Guide to Government Contracting
Get the information you need to successfully find win and manage government contracts.Learn More »
How to Find Government Contracts
Get started by finding government contracts that best fit your business.Learn More »
What is DCAA Compliance?
Learn more about DCAA compliance, and how contractors can reduce risk by avoiding and preparing for DCAA audits.Learn More »
Federal Government Contracting
Learn more about federal government contracts and where you can find them.Learn More »
How to Win Government Contracts
Discover how to beat the competition and win more government contracts.Learn More »
Types of Government Contracts
Learn about the four main types of government contracts that contractors encounter.Learn More »
Canadian Government Contracting
Learn more about the Canadian public sector market and how to find Canadian contracts.Learn More »
Guide to Govcon Compliance
Learn why compliance should be top of mind for all government contractors.Learn More »
What is CMMC?
Learn more about the basics of Cybersecurity Maturity Model Certification (CMMC).Learn More »
What is ITAR Compliance?
Learn more about the International Traffic in Arms Regulations (ITAR) and who it applies to.Learn More »
State & Local Contracting
Learn the basics of state and local government contracts and where you can find them.Learn More »
Basics of FAR & CAS
Learn about the Federal Acquisition Regulation (FAR) and Cost Accounting Standards (CAS).Learn More »
What is a Teaming Agreement?
Discover how teaming agreements can help you reach your government contracting goals.Learn More »